Materials

FILMS

A layer of natural material on a PET film to decorate all kind of plastic parts, through conventional overmoulding process.
F-ME

F-ME

PET film including seashell particles as decorative finishing

Flexible film suitable for overmoulding and in-mould decoration. Tuneable size.

F-ME Prototipo

Properties

  • PET can be easily removed from the final part, while the biobased finishing remains embedded on its surface.
  • Very high UV resistance (no loss or change of colour after 8 h of intense exposure at 66 W/m2).
  • Flexibility.
  • Compatible with a wide range of polymers.
F-TO

F-TO

PET film including gorse particles as decorative finishing

Flexible film suitable for overmoulding and in-mould decoration. Tuneable size.

F-TO Prototipo

Properties

  • PET can be easily removed from the final part, while the biobased finishing remains embedded on its surface.
  • UV resistance (slight yellowing after 8 h of intense exposure at 66 W/m2).
  • Flexibility.
  • Compatible with a wide range of polymers.
F-VI

F-VI

PET film including grapevine particles as decorative finishing

Flexible film suitable for overmoulding and in-mould decoration. Tuneable size.

F-VI Prototipo

Properties

  • PET can be easily removed from the final part, while the biobased finishing remains embedded on its surface.
  • UV resistance (slight darkening after 8 h of intense exposure at 66 W/m2).
  • Flexibility.
  • Compatible with a wide range of polymers.
F-SP

F-SP

PET film including pine sawdust as decorative finishing

Flexible film suitable for overmoulding and in-mould decoration. Tuneable size.

F-SP Prototipo

Properties

  • PET can be easily removed from the final part, while the biobased finishing remains embedded on its surface.
  • Flexibility.
  • Compatible with a wide range of polymers.
F-SE

F-SE

PET film including eucalyptus sawdust as decorative finishing

Flexible film suitable for overmoulding and in-mould decoration. Tuneable size.

F-SE Prototipo

Properties

  • PET can be easily removed from the final part, while the biobased finishing remains embedded on its surface.
  • Flexibility.
  • Compatible with a wide range of polymers.
F-PI

F-PI

PET film including pinecone particles as decorative finishing

Flexible film suitable for overmoulding and in-mould decoration. Tuneable size.

F-PI Prototipo

Properties

  • PET can be easily removed from the final part, while the biobased finishing remains embedded on its surface.
  • Flexibility.
  • Compatible with a wide range of polymers.

PELLETS

Particles of natural material ready to be mixed with plastic pellets and manufacture all kind of plastic parts through conventional injection moulding process.
P-ME-H

P-ME-H

Seashell particles ready to mix with plastic pellets

Seashell powder + plastic pellets.

P-ME-H prototipo

Properties

  • The seashell powder can be directly fed into the injection moulding machine right after a pre-mix with plastic pellets.
  • High content of seashell.
  • Wide range of polymers can be used.
  • Very high UV resistance (no loss or change of colour after 8 h of intense exposure at 66 W/m2).
P-ME-L

P-ME-L

Seashell particles ready to mix with plastic pellets

Seashell powder + plastic pellets.

P-ME-L prototipo

Properties

  • The seashell powder can be directly fed into the injection moulding machine right after a pre-mix with plastic pellets.
  • Wide range of polymers can be used.
  • Very high UV resistance (no loss or change of colour after 8 h of intense exposure at 66 W/m2).
P-PI

P-PI

Pinecone particles ready to mix with plastic pellets

Pinecone particles + plastic pellets.

P-PI Prototipo

Properties

  • The pinecone particles can be directly fed into the injection moulding machine right after a pre-mix with plastic pellets.
  • Can be used with polymers with a process temperature below 220ºC.
  • Very high UV resistance (no loss or change of colour after 8 h of intense exposure at 66 W/m2).

PP 30 ADOLFO DOMINGUEZ

Plastic composite reinforced with wood fiber with high content of renewable material

Polypropylene + 30 % of ADOLFO DOMINGUEZ wood fibers

Properties

  • Specially designed for injection moulding applications.

  • The main ingredients are specially processed wood fibers and virgin polypropylene.

  • These fibers significantly increase the rigidity and strength of polypropylene.

PP 30 KIWI

Plastic composite reinforced with KIWI fiber with high content of renewable material from agricultural waste

Polypropylene + 30 % of KIWI fibers

.

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed KIWI fibers and virgin polypropylene.
  • The KIWI fibers significantly increase the rigidity and strength of polypropylene.

PP 30 MUSSEL

Plastic composite reinforced with high content of renewable material, usually mussel shell

Polypropylene + 30 % of MUSSEL shell

Properties

  • Specially designed for injection moulding applications.

  • The main ingredients are processed mussel shells and virgin polypropylene.

PP 30 NITENS

Plastic composite reinforced with NITENS fiber with high content of renewable material from forest waste

Polypropylene + 30 % of NITENS fiber

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed NITENS fibers and virgin polypropylene.
  • The NITENS fibers significantly increase the rigidity and strength of polypropylene.

PP 40 NITENS

Plastic composite reinforced with NITENS fiber with high content of renewable material from forest waste

Polypropylene + 40 % of NITENS fiber

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed NITENS fibers and virgin polypropylene.
  • The NITENS fibers significantly increase the rigidity and strength of polypropylene.

PP 30 STONE

Plastic composite reinforced with stone powder from endogenous resources exploitation

Polypropylene + 30 % of STONE powder

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed STONE powder and virgin polypropylene.
  • The stone powder significantly increase the rigidity and strength of polypropylene.

PP 30 GORSE

Plastic composite reinforced with gorse fiber with high content of renewable material from forest waste

Polypropylene + 30 % of GORSE fiber

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed gorse fiber and virgin polypropylene.
  • The gorse fibers significantly increase the rigidity and strength of polypropylene.

PP 30 GRAPEVINE

Plastic composite reinforced with grapevine fiber, renewable material from agricultural waste

Polypropylene + 30 % of GRAPEVINE fiber

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed grapevine fibers and virgin polypropylene.
  • The grapevine fibers significantly increase the rigidity and strength of polypropylene.

PP 30 BROOM

Plastic composite reinforced with broom fiber with high content of renewable material from forest waste

Polypropylene + 30 % of broom fiber

Properties

  • Specially designed for injection moulding applications.
  • The main ingredients are specially processed brush fibers and virgin polypropylene.
  • The broom fibers significantly increase the rigidity and strength of polypropylene.
  • Logo CTAG
  • Logo Xunta
  • Logo PIEP
  • Logo Interreg
  • Logo ERA
This website uses cookies and other technologies so that we can improve your experience on our sites: More information